Rifle Marksmanship: Shot Analysis

Part 7 –

Rifle Marksmanship: Shot Analysis

Rifle Marksmanship: Shot Analysis. A proper shot analysis will help determine what you may or may not be doing wrong. If you’re having difficulty with getting consistent groups, do you adjust your shooting position or do you adjust your turrets to get an accurate shot on a target? Whatever the case, according to Bergara Shooting Academy instructor William “Bart” Bartholomew, to make an accurate assessment, he highly recommends that you maintain a data book. Here is Bart’s checklist to help you determine the probable causes of certain bad shots:

If Your Groups Tends to Be Low and Right

Possible Causes if You’re a Right-Handed Shooter:

1. Improper trigger control / Anticipating recoil. Learn more on How to Improve Trigger Control
2. Your left hand may not be positioned properly and you’re not holding the rifle stock firmly in your shoulder.
3. Your right elbow may be slipping

What if Your Group is Scattered About the Target?

Things to Check:

1. You may not be positioned correctly behind the scope (at the proper designated eye relief) which is not giving you the full sight picture, or you may be taking scope shadow on one side.
2. Your concentration is on the target, not on the cross hairs
3. Your check weld is not consistent from shot to shot
4. Your body position and body alignment at the bench is not correct.
5. Improper parallax adjustment.

Getting a Good Group but Still Getting Several Erratic Shots

Possible Reasons:

1. Flinching – Causing your shots to go anywhere
2. Bucking – Causing your shots to be scattered from 7 to 10 o’clock
3. Jerking – Also causing your shots to go about anywhere

 Your Group is Strung Up and Down Through the Target

Shooting Discipline to Concentrate On:

1. Proper breathing techniques – You may be breathing while firing.  Learn More
2. Proper vertical alignment of the cross hairs – You may be canting
3. Consistent check weld – You may not be getting in the same position each time

You’re Getting a Compact Group but it’s Outside of the Target

Possible Issues:

1. Your scope may be incorrectly zeroed
2. Failure to compensate for the wind
3. Improper point of aim
4. Not at the designed eye relief length causing scope shadow

Group From Center of the Target Out the Bottom

Things to Check:

1. You may not be getting the full sight picture – Check for scope shadow.
2. You may be changing the position of the rifle in your shoulder – Concentrate on being consistent

In the Scope Fndamentals blog we show you how to correct for “Scope Shadow”

Horizontal Group Across the Target

Possible Causes:

1. Scope shadow
2. Canted weapon
3. Improper point of aim

Once you have accurately identified the cause and made the necessary adjustments to bring your shots together, it’s very rewarding to hit the desired point of aim with consistency.

Read the entire Rifle Marksmanship Series:

Part 1 – Scope Fundamentals

Part 2 – Trigger Control Equals Success

Part 3 – Follow Through

Part 4 – Breathing Control Techniques

Part 5 – Key Elements of a Good Shooting Position

Part 6 – Supported Shooting Positions

Part 7 – Shot Analysis